[Script Info]
Title: 
[Events]
Format: Layer, Start, End, Style, Name, MarginL, MarginR, MarginV, Effect, Text
Dialogue: 0,0:00:00.03,0:00:02.31,Default,,0000,0000,0000,,in this lecture you'll see the
Dialogue: 0,0:00:02.31,0:00:06.86,Default,,0000,0000,0000,,configuration for SNMP version 3
Dialogue: 0,0:00:06.86,0:00:12.17,Default,,0000,0000,0000,,[Music]
Dialogue: 0,0:00:12.99,0:00:17.35,Default,,0000,0000,0000,,so you saw earlier that in SNMP version
Dialogue: 0,0:00:17.35,0:00:21.61,Default,,0000,0000,0000,,1 on to the SNMP manager
Dialogue: 0,0:00:21.61,0:00:24.76,Default,,0000,0000,0000,,that's our NMS server and the SNMP agent
Dialogue: 0,0:00:24.76,0:00:27.97,Default,,0000,0000,0000,,that server or switch they recognize
Dialogue: 0,0:00:27.97,0:00:30.49,Default,,0000,0000,0000,,each other through simple unencrypted
Dialogue: 0,0:00:30.49,0:00:32.98,Default,,0000,0000,0000,,community strings so it's not very
Dialogue: 0,0:00:32.98,0:00:33.73,Default,,0000,0000,0000,,secure
Dialogue: 0,0:00:33.73,0:00:36.55,Default,,0000,0000,0000,,Baggett's improved upon with SNMP
Dialogue: 0,0:00:36.55,0:00:39.21,Default,,0000,0000,0000,,version 3 which does support
Dialogue: 0,0:00:39.21,0:00:43.30,Default,,0000,0000,0000,,authentication and encryption with SNMP
Dialogue: 0,0:00:43.30,0:00:46.75,Default,,0000,0000,0000,,version 3 the security model uses users
Dialogue: 0,0:00:46.75,0:00:49.33,Default,,0000,0000,0000,,and groups so we're going to configure a
Dialogue: 0,0:00:49.33,0:00:52.03,Default,,0000,0000,0000,,user on the right order switch and we
Dialogue: 0,0:00:52.03,0:00:55.75,Default,,0000,0000,0000,,configure a matching user on the NMS
Dialogue: 0,0:00:55.75,0:00:57.94,Default,,0000,0000,0000,,server that's how they recognize each
Dialogue: 0,0:00:57.94,0:01:00.100,Default,,0000,0000,0000,,other there is also a group as well so
Dialogue: 0,0:01:00.100,0:01:03.10,Default,,0000,0000,0000,,most of the settings are configured at
Dialogue: 0,0:01:03.10,0:01:05.38,Default,,0000,0000,0000,,the group level and those settings are
Dialogue: 0,0:01:05.38,0:01:06.94,Default,,0000,0000,0000,,going to be applied to the user
Dialogue: 0,0:01:06.94,0:01:09.10,Default,,0000,0000,0000,,depending on which group it's actually
Dialogue: 0,0:01:09.10,0:01:13.33,Default,,0000,0000,0000,,in there's three different security
Dialogue: 0,0:01:13.33,0:01:15.67,Default,,0000,0000,0000,,levels available and these are
Dialogue: 0,0:01:15.67,0:01:17.59,Default,,0000,0000,0000,,configured at the group level so
Dialogue: 0,0:01:17.59,0:01:19.12,Default,,0000,0000,0000,,normally you're going to just use one
Dialogue: 0,0:01:19.12,0:01:21.52,Default,,0000,0000,0000,,particular security level but it is
Dialogue: 0,0:01:21.52,0:01:23.92,Default,,0000,0000,0000,,possible that you could have one NMS
Dialogue: 0,0:01:23.92,0:01:26.26,Default,,0000,0000,0000,,server in one group it's got one
Dialogue: 0,0:01:26.26,0:01:28.39,Default,,0000,0000,0000,,security level and a different enemy a
Dialogue: 0,0:01:28.39,0:01:30.19,Default,,0000,0000,0000,,server and a different group but it's
Dialogue: 0,0:01:30.19,0:01:31.99,Default,,0000,0000,0000,,got a different security level that
Dialogue: 0,0:01:31.99,0:01:33.67,Default,,0000,0000,0000,,would be a pretty weird thing to do but
Dialogue: 0,0:01:33.67,0:01:36.43,Default,,0000,0000,0000,,it is possible to do that these three
Dialogue: 0,0:01:36.43,0:01:38.41,Default,,0000,0000,0000,,different security levels the first one
Dialogue: 0,0:01:38.41,0:01:41.92,Default,,0000,0000,0000,,is no off no trip which means no
Dialogue: 0,0:01:41.92,0:01:44.50,Default,,0000,0000,0000,,authentication and no privacy with no
Dialogue: 0,0:01:44.50,0:01:47.17,Default,,0000,0000,0000,,off no proof no authentication password
Dialogue: 0,0:01:47.17,0:01:49.48,Default,,0000,0000,0000,,is exchanged and the communications
Dialogue: 0,0:01:49.48,0:01:51.82,Default,,0000,0000,0000,,between the agent and the server are not
Dialogue: 0,0:01:51.82,0:01:54.91,Default,,0000,0000,0000,,encrypted so with no off no probe it
Dialogue: 0,0:01:54.91,0:01:56.50,Default,,0000,0000,0000,,still doesn't use a community thing it
Dialogue: 0,0:01:56.50,0:01:58.57,Default,,0000,0000,0000,,still uses a username because there's
Dialogue: 0,0:01:58.57,0:02:00.13,Default,,0000,0000,0000,,SNMP version 3
Dialogue: 0,0:02:00.13,0:02:02.92,Default,,0000,0000,0000,,but that username basically replaces
Dialogue: 0,0:02:02.92,0:02:04.81,Default,,0000,0000,0000,,works with same eyes with community
Dialogue: 0,0:02:04.81,0:02:08.62,Default,,0000,0000,0000,,string an SNMP version 1 and version 2
Dialogue: 0,0:02:08.62,0:02:10.87,Default,,0000,0000,0000,,so there's not much point in doing that
Dialogue: 0,0:02:10.87,0:02:12.22,Default,,0000,0000,0000,,doesn't really give you any advantage
Dialogue: 0,0:02:12.22,0:02:15.49,Default,,0000,0000,0000,,over the old SNMP versions the next
Dialogue: 0,0:02:15.49,0:02:17.23,Default,,0000,0000,0000,,security level we've got is off
Dialogue: 0,0:02:17.23,0:02:20.29,Default,,0000,0000,0000,,no proof with off no proof password
Dialogue: 0,0:02:20.29,0:02:23.38,Default,,0000,0000,0000,,authentication is used so the NMS server
Dialogue: 0,0:02:23.38,0:02:25.45,Default,,0000,0000,0000,,and the network device we'll see
Dialogue: 0,0:02:25.45,0:02:27.76,Default,,0000,0000,0000,,early authenticate each other when we do
Dialogue: 0,0:02:27.76,0:02:28.98,Default,,0000,0000,0000,,that in staunton occasion the
Dialogue: 0,0:02:28.98,0:02:31.24,Default,,0000,0000,0000,,authentication is encrypted so the user
Dialogue: 0,0:02:31.24,0:02:33.61,Default,,0000,0000,0000,,and user name and password is encrypted
Dialogue: 0,0:02:33.61,0:02:36.61,Default,,0000,0000,0000,,is not good in plaintext but after that
Dialogue: 0,0:02:36.61,0:02:39.52,Default,,0000,0000,0000,,initial authentication no encryption is
Dialogue: 0,0:02:39.52,0:02:41.44,Default,,0000,0000,0000,,used for communications between the
Dialogue: 0,0:02:41.44,0:02:44.17,Default,,0000,0000,0000,,devices so if the server pulls some
Dialogue: 0,0:02:44.17,0:02:46.03,Default,,0000,0000,0000,,information from the device but it's
Dialogue: 0,0:02:46.03,0:02:47.98,Default,,0000,0000,0000,,going to go over the network unencrypted
Dialogue: 0,0:02:47.98,0:02:50.50,Default,,0000,0000,0000,,so the last one is the one that we're
Dialogue: 0,0:02:50.50,0:02:52.96,Default,,0000,0000,0000,,most likely gonna want to use which is
Dialogue: 0,0:02:52.96,0:02:55.75,Default,,0000,0000,0000,,off prif with off proof password
Dialogue: 0,0:02:55.75,0:02:57.94,Default,,0000,0000,0000,,authentication is used again the same as
Dialogue: 0,0:02:57.94,0:03:00.00,Default,,0000,0000,0000,,it was in off no proof but
Dialogue: 0,0:03:00.00,0:03:02.38,Default,,0000,0000,0000,,communications between the agent and the
Dialogue: 0,0:03:02.38,0:03:05.08,Default,,0000,0000,0000,,server are also encrypted so with off
Dialogue: 0,0:03:05.08,0:03:07.75,Default,,0000,0000,0000,,Prive the NMS server and the device are
Dialogue: 0,0:03:07.75,0:03:09.73,Default,,0000,0000,0000,,going to securely authenticate each
Dialogue: 0,0:03:09.73,0:03:11.89,Default,,0000,0000,0000,,other but does not go in plaintext and
Dialogue: 0,0:03:11.89,0:03:14.17,Default,,0000,0000,0000,,also whenever for sharing information
Dialogue: 0,0:03:14.17,0:03:16.90,Default,,0000,0000,0000,,that is also encrypted as well so this
Dialogue: 0,0:03:16.90,0:03:18.70,Default,,0000,0000,0000,,is the most secure way of doing it if
Dialogue: 0,0:03:18.70,0:03:21.64,Default,,0000,0000,0000,,we're using SNMP version 3 most likely
Dialogue: 0,0:03:21.64,0:03:24.97,Default,,0000,0000,0000,,were going to be using off proof ok so
Dialogue: 0,0:03:24.97,0:03:27.67,Default,,0000,0000,0000,,let's look at the configuration so you
Dialogue: 0,0:03:27.67,0:03:29.38,Default,,0000,0000,0000,,saw earlier in this lecture we're gonna
Dialogue: 0,0:03:29.38,0:03:31.06,Default,,0000,0000,0000,,have the group and we're gonna have the
Dialogue: 0,0:03:31.06,0:03:33.76,Default,,0000,0000,0000,,user as well let's configure the group
Dialogue: 0,0:03:33.76,0:03:37.69,Default,,0000,0000,0000,,first so a global config I say SNMP -
Dialogue: 0,0:03:37.69,0:03:40.93,Default,,0000,0000,0000,,server group in this example I've called
Dialogue: 0,0:03:40.93,0:03:43.33,Default,,0000,0000,0000,,the group black box - group then
Dialogue: 0,0:03:43.33,0:03:45.73,Default,,0000,0000,0000,,actually v3 to say that we're using SNMP
Dialogue: 0,0:03:45.73,0:03:48.13,Default,,0000,0000,0000,,version 3 and then the example I've used
Dialogue: 0,0:03:48.13,0:03:49.96,Default,,0000,0000,0000,,the context-sensitive help I've hit the
Dialogue: 0,0:03:49.96,0:03:51.79,Default,,0000,0000,0000,,question mark to see what the next key
Dialogue: 0,0:03:51.79,0:03:53.80,Default,,0000,0000,0000,,word is and this is where we set the
Dialogue: 0,0:03:53.80,0:03:57.13,Default,,0000,0000,0000,,security level of either off no off or
Dialogue: 0,0:03:57.13,0:04:04.63,Default,,0000,0000,0000,,Prive then next thing that we do so in
Dialogue: 0,0:04:04.63,0:04:06.58,Default,,0000,0000,0000,,an example I've set proof because I want
Dialogue: 0,0:04:06.58,0:04:08.80,Default,,0000,0000,0000,,the most secure level then I've put the
Dialogue: 0,0:04:08.80,0:04:10.57,Default,,0000,0000,0000,,question mark in again and see what the
Dialogue: 0,0:04:10.57,0:04:12.73,Default,,0000,0000,0000,,next key word is next key words we've
Dialogue: 0,0:04:12.73,0:04:16.03,Default,,0000,0000,0000,,got access context match no if I read
Dialogue: 0,0:04:16.03,0:04:19.72,Default,,0000,0000,0000,,and write with access you can set an
Dialogue: 0,0:04:19.72,0:04:21.70,Default,,0000,0000,0000,,access list I'll talk about that a bit
Dialogue: 0,0:04:21.70,0:04:24.61,Default,,0000,0000,0000,,more in the next slide context and match
Dialogue: 0,0:04:24.61,0:04:28.30,Default,,0000,0000,0000,,both apply to contexts and know if I
Dialogue: 0,0:04:28.30,0:04:31.84,Default,,0000,0000,0000,,read and write are about views so let's
Dialogue: 0,0:04:31.84,0:04:33.88,Default,,0000,0000,0000,,see what that means so the first key
Dialogue: 0,0:04:33.88,0:04:35.95,Default,,0000,0000,0000,,word available there was access what you
Dialogue: 0,0:04:35.95,0:04:38.02,Default,,0000,0000,0000,,can do is you can configure a normal
Dialogue: 0,0:04:38.02,0:04:38.58,Default,,0000,0000,0000,,acts
Dialogue: 0,0:04:38.58,0:04:41.22,Default,,0000,0000,0000,,on axis list on the rotor of a switch
Dialogue: 0,0:04:41.22,0:04:44.16,Default,,0000,0000,0000,,where you specify the IP address of the
Dialogue: 0,0:04:44.16,0:04:46.62,Default,,0000,0000,0000,,NMS server and then when you configure
Dialogue: 0,0:04:46.62,0:04:49.62,Default,,0000,0000,0000,,your SNMP settings here you can
Dialogue: 0,0:04:49.62,0:04:51.48,Default,,0000,0000,0000,,reference our access list which means
Dialogue: 0,0:04:51.48,0:04:53.94,Default,,0000,0000,0000,,you're locking it down the vista drivers
Dialogue: 0,0:04:53.94,0:04:55.80,Default,,0000,0000,0000,,or switch will only communicate with
Dialogue: 0,0:04:55.80,0:04:59.67,Default,,0000,0000,0000,,SNMP with that particular IP address so
Dialogue: 0,0:04:59.67,0:05:01.41,Default,,0000,0000,0000,,you're locking it down to the IP address
Dialogue: 0,0:05:01.41,0:05:04.80,Default,,0000,0000,0000,,of your NMS server the next key words we
Dialogue: 0,0:05:04.80,0:05:06.60,Default,,0000,0000,0000,,had in there were other contexts
Dialogue: 0,0:05:06.60,0:05:09.90,Default,,0000,0000,0000,,contacts are used on switches to specify
Dialogue: 0,0:05:09.90,0:05:13.53,Default,,0000,0000,0000,,which V lines are accessible via SNMP so
Dialogue: 0,0:05:13.53,0:05:15.18,Default,,0000,0000,0000,,if you're configuring a switch you might
Dialogue: 0,0:05:15.18,0:05:17.19,Default,,0000,0000,0000,,need to set that up so that your NMX
Dialogue: 0,0:05:17.19,0:05:19.29,Default,,0000,0000,0000,,system cannot just other view lines not
Dialogue: 0,0:05:19.29,0:05:22.59,Default,,0000,0000,0000,,just the default v1 and then the last
Dialogue: 0,0:05:22.59,0:05:24.93,Default,,0000,0000,0000,,thing we could set there where our views
Dialogue: 0,0:05:24.93,0:05:27.36,Default,,0000,0000,0000,,views can be used to limit what
Dialogue: 0,0:05:27.36,0:05:30.18,Default,,0000,0000,0000,,information is accessible to the NMS
Dialogue: 0,0:05:30.18,0:05:33.72,Default,,0000,0000,0000,,server and we had a review a right view
Dialogue: 0,0:05:33.72,0:05:36.45,Default,,0000,0000,0000,,and a notify view are all available if
Dialogue: 0,0:05:36.45,0:05:39.84,Default,,0000,0000,0000,,you don't specify a read view then all
Dialogue: 0,0:05:39.84,0:05:43.08,Default,,0000,0000,0000,,MIB objects are accessible to read so by
Dialogue: 0,0:05:43.08,0:05:45.81,Default,,0000,0000,0000,,default the NMS server can get all the
Dialogue: 0,0:05:45.81,0:05:48.51,Default,,0000,0000,0000,,different SNMP information from that
Dialogue: 0,0:05:48.51,0:05:50.73,Default,,0000,0000,0000,,particular device so if you want to lock
Dialogue: 0,0:05:50.73,0:05:52.71,Default,,0000,0000,0000,,it down to only be able to gather a
Dialogue: 0,0:05:52.71,0:05:55.44,Default,,0000,0000,0000,,person or maybe a pool a particular set
Dialogue: 0,0:05:55.44,0:05:57.00,Default,,0000,0000,0000,,of information then you would use a
Dialogue: 0,0:05:57.00,0:05:59.61,Default,,0000,0000,0000,,review for that next one was the right
Dialogue: 0,0:05:59.61,0:06:01.98,Default,,0000,0000,0000,,view if you don't specify a right view
Dialogue: 0,0:06:01.98,0:06:04.83,Default,,0000,0000,0000,,but no MIB objects are accessible to
Dialogue: 0,0:06:04.83,0:06:06.78,Default,,0000,0000,0000,,right so this works the other way so by
Dialogue: 0,0:06:06.78,0:06:09.27,Default,,0000,0000,0000,,default it can read everything but it
Dialogue: 0,0:06:09.27,0:06:12.21,Default,,0000,0000,0000,,can write nothing so if you want to walk
Dialogue: 0,0:06:12.21,0:06:14.37,Default,,0000,0000,0000,,down limit what it can read configure a
Dialogue: 0,0:06:14.37,0:06:16.53,Default,,0000,0000,0000,,read view if you want it to be able to
Dialogue: 0,0:06:16.53,0:06:18.93,Default,,0000,0000,0000,,write anything then you have to
Dialogue: 0,0:06:18.93,0:06:21.33,Default,,0000,0000,0000,,configure a right view before it can
Dialogue: 0,0:06:21.33,0:06:23.49,Default,,0000,0000,0000,,explicitly configuring a right view it
Dialogue: 0,0:06:23.49,0:06:25.71,Default,,0000,0000,0000,,doesn't get any right access so by
Dialogue: 0,0:06:25.71,0:06:27.93,Default,,0000,0000,0000,,default the NMS server gets read-only
Dialogue: 0,0:06:27.93,0:06:31.35,Default,,0000,0000,0000,,access to all MIB s the last one was
Dialogue: 0,0:06:31.35,0:06:33.75,Default,,0000,0000,0000,,been notified view notify view is used
Dialogue: 0,0:06:33.75,0:06:36.12,Default,,0000,0000,0000,,to send notifications to members of the
Dialogue: 0,0:06:36.12,0:06:38.76,Default,,0000,0000,0000,,group notification is a trap if you
Dialogue: 0,0:06:38.76,0:06:40.44,Default,,0000,0000,0000,,don't specify anything it will be
Dialogue: 0,0:06:40.44,0:06:43.53,Default,,0000,0000,0000,,disabled by default okay so those were
Dialogue: 0,0:06:43.53,0:06:47.79,Default,,0000,0000,0000,,our views so when I configure the group
Dialogue: 0,0:06:47.79,0:06:49.98,Default,,0000,0000,0000,,here in this example the fuel command
Dialogue: 0,0:06:49.98,0:06:52.54,Default,,0000,0000,0000,,that I use is SNMP server guru
Dialogue: 0,0:06:52.54,0:06:56.14,Default,,0000,0000,0000,,black box group v3 Prive so I haven't
Dialogue: 0,0:06:56.14,0:06:58.42,Default,,0000,0000,0000,,configured any access lists or any views
Dialogue: 0,0:06:58.42,0:07:00.85,Default,,0000,0000,0000,,or anything here they are all optional
Dialogue: 0,0:07:00.85,0:07:03.25,Default,,0000,0000,0000,,and because I'm using the defaults here
Dialogue: 0,0:07:03.25,0:07:06.25,Default,,0000,0000,0000,,the NMS server that is in this group
Dialogue: 0,0:07:06.25,0:07:09.43,Default,,0000,0000,0000,,will have full read-only access to the
Dialogue: 0,0:07:09.43,0:07:11.40,Default,,0000,0000,0000,,device
Dialogue: 0,0:07:11.40,0:07:14.80,Default,,0000,0000,0000,,okay so I've configured my group the
Dialogue: 0,0:07:14.80,0:07:16.57,Default,,0000,0000,0000,,next thing I'm gonna want to do is
Dialogue: 0,0:07:16.57,0:07:21.31,Default,,0000,0000,0000,,configure my user so the first word I
Dialogue: 0,0:07:21.31,0:07:24.49,Default,,0000,0000,0000,,use again is SNMP - server but I'm doing
Dialogue: 0,0:07:24.49,0:07:26.53,Default,,0000,0000,0000,,the the user this thing so that's an NP
Dialogue: 0,0:07:26.53,0:07:29.92,Default,,0000,0000,0000,,server user and then for my example user
Dialogue: 0,0:07:29.92,0:07:33.19,Default,,0000,0000,0000,,I've called it black box - user next I
Dialogue: 0,0:07:33.19,0:07:35.77,Default,,0000,0000,0000,,specify you the group that this user is
Dialogue: 0,0:07:35.77,0:07:37.93,Default,,0000,0000,0000,,in and I'm putting it in the black box
Dialogue: 0,0:07:37.93,0:07:40.42,Default,,0000,0000,0000,,group but I just configured a minute ago
Dialogue: 0,0:07:40.42,0:07:45.01,Default,,0000,0000,0000,,I say v3 for SNMP version 3 and then off
Dialogue: 0,0:07:45.01,0:07:47.52,Default,,0000,0000,0000,,is where I'm gonna specify the
Dialogue: 0,0:07:47.52,0:07:49.66,Default,,0000,0000,0000,,authentication algorithm that I'm gonna
Dialogue: 0,0:07:49.66,0:07:54.58,Default,,0000,0000,0000,,use I can either use md5 or sha-1 Shah
Dialogue: 0,0:07:54.58,0:07:56.59,Default,,0000,0000,0000,,is more secure but it's a little bit
Dialogue: 0,0:07:56.59,0:08:00.73,Default,,0000,0000,0000,,slower okay next up so I've set SNMP
Dialogue: 0,0:08:00.73,0:08:03.04,Default,,0000,0000,0000,,server user flat box user in the flat
Dialogue: 0,0:08:03.04,0:08:06.19,Default,,0000,0000,0000,,box group SNMP version 3 off I'm using
Dialogue: 0,0:08:06.19,0:08:08.53,Default,,0000,0000,0000,,sha and I'm using an authentication
Dialogue: 0,0:08:08.53,0:08:11.20,Default,,0000,0000,0000,,password of off password for this
Dialogue: 0,0:08:11.20,0:08:13.51,Default,,0000,0000,0000,,example so you know we talked about the
Dialogue: 0,0:08:13.51,0:08:15.28,Default,,0000,0000,0000,,three different security levels and
Dialogue: 0,0:08:15.28,0:08:17.41,Default,,0000,0000,0000,,there you specify authentication and
Dialogue: 0,0:08:17.41,0:08:20.38,Default,,0000,0000,0000,,privacy separately but we configure the
Dialogue: 0,0:08:20.38,0:08:22.03,Default,,0000,0000,0000,,authentication and the privacy
Dialogue: 0,0:08:22.03,0:08:24.07,Default,,0000,0000,0000,,separately as well so right now I've
Dialogue: 0,0:08:24.07,0:08:26.56,Default,,0000,0000,0000,,already configured the authentication
Dialogue: 0,0:08:26.56,0:08:30.01,Default,,0000,0000,0000,,next up I'm gonna configure the privacy
Dialogue: 0,0:08:30.01,0:08:32.62,Default,,0000,0000,0000,,so I say Prive and I've used a question
Dialogue: 0,0:08:32.62,0:08:34.75,Default,,0000,0000,0000,,mark again and see what options I've got
Dialogue: 0,0:08:34.75,0:08:37.81,Default,,0000,0000,0000,,here and I can either use theirs Triple
Dialogue: 0,0:08:37.81,0:08:41.23,Default,,0000,0000,0000,,DES or AES encryption AES is the most
Dialogue: 0,0:08:41.23,0:08:43.72,Default,,0000,0000,0000,,modern of those it's the most secure but
Dialogue: 0,0:08:43.72,0:08:47.02,Default,,0000,0000,0000,,it's a little bit slower okay
Dialogue: 0,0:08:47.02,0:08:51.22,Default,,0000,0000,0000,,after I configure that so here and I
Dialogue: 0,0:08:51.22,0:08:52.30,Default,,0000,0000,0000,,won't be like the whole the whole
Dialogue: 0,0:08:52.30,0:08:54.97,Default,,0000,0000,0000,,community again I've got up to I'm using
Dialogue: 0,0:08:54.97,0:08:58.63,Default,,0000,0000,0000,,AES encryption next up I specify whether
Dialogue: 0,0:08:58.63,0:09:03.67,Default,,0000,0000,0000,,it's 128 192 or 256 bit obviously the
Dialogue: 0,0:09:03.67,0:09:05.29,Default,,0000,0000,0000,,higher of a number the more secure it's
Dialogue: 0,0:09:05.29,0:09:06.40,Default,,0000,0000,0000,,going to be but it's
Dialogue: 0,0:09:06.40,0:09:09.75,Default,,0000,0000,0000,,take more CPU cycles be a little slower
Dialogue: 0,0:09:09.75,0:09:12.94,Default,,0000,0000,0000,,so looking at the complete command
Dialogue: 0,0:09:12.94,0:09:15.82,Default,,0000,0000,0000,,I've got SNMP server user black box user
Dialogue: 0,0:09:15.82,0:09:18.28,Default,,0000,0000,0000,,in the black box group it's using SNMP
Dialogue: 0,0:09:18.28,0:09:21.28,Default,,0000,0000,0000,,version 3 for authentication I'm using
Dialogue: 0,0:09:21.28,0:09:24.73,Default,,0000,0000,0000,,shop as my algorithm my password is off
Dialogue: 0,0:09:24.73,0:09:28.09,Default,,0000,0000,0000,,password and for Prive I'm using AES 128
Dialogue: 0,0:09:28.09,0:09:30.88,Default,,0000,0000,0000,,bit encryption with a password of Prive
Dialogue: 0,0:09:30.88,0:09:34.12,Default,,0000,0000,0000,,password so that is my user and my group
Dialogue: 0,0:09:34.12,0:09:36.73,Default,,0000,0000,0000,,setup on my router or switch now what I
Dialogue: 0,0:09:36.73,0:09:38.89,Default,,0000,0000,0000,,would do next as I would go on to my n
Dialogue: 0,0:09:38.89,0:09:41.32,Default,,0000,0000,0000,,MF server and I would configure a user
Dialogue: 0,0:09:41.32,0:09:44.17,Default,,0000,0000,0000,,there with matching settings here so I
Dialogue: 0,0:09:44.17,0:09:46.51,Default,,0000,0000,0000,,would set it with the same username a
Dialogue: 0,0:09:46.51,0:09:49.51,Default,,0000,0000,0000,,flat box user I would specify the off
Dialogue: 0,0:09:49.51,0:09:52.18,Default,,0000,0000,0000,,password and reprove password and that's
Dialogue: 0,0:09:52.18,0:09:54.88,Default,,0000,0000,0000,,me done my n MF server is now going to
Dialogue: 0,0:09:54.88,0:09:57.13,Default,,0000,0000,0000,,be able to access my device and pull
Dialogue: 0,0:09:57.13,0:09:59.50,Default,,0000,0000,0000,,information from it thanks for watching
Dialogue: 0,0:09:59.50,0:10:01.69,Default,,0000,0000,0000,,if you want to get hands-on practice
Dialogue: 0,0:10:01.69,0:10:05.17,Default,,0000,0000,0000,,with Cisco networks for free then you
Dialogue: 0,0:10:05.17,0:10:09.31,Default,,0000,0000,0000,,can download my 400 page CCNA lab guide
Dialogue: 0,0:10:09.31,0:10:11.32,Default,,0000,0000,0000,,which you can see above my head right
Dialogue: 0,0:10:11.32,0:10:14.65,Default,,0000,0000,0000,,now also check out the video about my
Dialogue: 0,0:10:14.65,0:10:17.32,Default,,0000,0000,0000,,CCNA course it's highest rated course
Dialogue: 0,0:10:17.32,0:10:20.64,Default,,0000,0000,0000,,online thanks