[Eli Oliver]
Okay, so I'm Eli Oliver.
I started at USU last semester,
so this is my second semester.
First year.
I'm originally from Tennessee.
From a middle of nowhere town,
about an hour and a half east of
Nashville.
I graduated from UT Knoxville.
Bachelor's in soil science.
Let's see, okay.
Just to show,
I kind of have some idea of what,
I know what I'm doing.
I was on the UT solar judging team
from spring 2017 to fall 2019,
and within that span, we were the regional
and national champion team in 2017, 2018,
and I was the first place individual
at the 2019 regionals.
And I'll argue with some people
that we would have won
nationals in 2020
had they not canceled it due to Covid.
Okay, you can switch to the next one.
Okay, so
before I go up telling you how to texture
and what it entails, I'm,
basically just kind of go over
why we care about texture.
It's one of the most basic
soil properties, but it influences
so many other things.
It's really good to know what you have
before
you go adding things to it
or amending your soil.
Some of the main things
texture effects is water storage,
drainage and water infiltration.
And just kind of explain this.
If you have a sandy soil, you're going to
irrigate at a lesser amount,
but you're going to do it
at a more frequent interval.
And, with clays, you're going to irrigate
for a longer amount of time,
but you're not going to do it
as frequently.
So you do it for just 1 or 2
days, compared to maybe
3 or 4 days for a sandy soil,
or depending on what you need.
It also
affects the amount of aeration in the soil
and, along with the ease
of working the soil up.
If you have a real high clay percentage
soil, you're going to have a hard time
tilling it up if you need to,
especially if it starts to dry out.
And it also affects, your soil fertility
because, all of your nutrient holding
capacity is going to come from your clay.
It's got the, the largest
amount of surface area per unit volume.
So that's where all your nutrient holding
capacity comes from.
And there's really not any on them, silt
and sand sized particles and,
it also lets you know what kind of topsoil
you want to use.
Ideally, you want to use an equal mixture
of about the three particle sizes.
And we'll get more into that
of what that is.
And what constitutes this.
But you want a good mixture of each one.
If you're ordering in topsoil, the use
and you can switch to the next one. Now.
Okay.
So, there's three particle sizes
that make up soil texture.
Sand, silt and clay.
Sand is 0.08in, 2.002in.
And sorry for the
real small numbers on here,
this is usually in metric.
So I converted it over two inches.
Sand is going to be the only particle size
visible to the naked eye.
The other two
you need microscopes to see in clay.
You're going to need
a real strong microscope to see,
the individual particles,
as you can see, silt
is 0.00228 to the -50in.
And clay is everything
less than eight to the -15in in diameter.
And I'm not including
rock fragments in this, but rock fragment
is anything bigger than the sand sized
particles.
And here's a visual representation
so you can see each size
compared to each other.
And this is in metric,
but you can still see
how much bigger sand is than the other two
and how small clay is.
And, something out here, clay isn't really
the shape it is in this, diagram.
It's more of a platy.
Shaped particle, and the other two
are more spherical.
And that, again, ties
into some of the surface area
properties of the clays.
If you want to switch.
Okay.
So just some of the goals for today.
I'm, I'm going to try to teach everybody
how to textured by feel
and doing that will I'm a learn
how to estimate
the particle percentages
of your sand, silt and clay.
And then I'll show you how to determine
the texture, class of your soil
and what that might mean for you.
Okay, so before
I get into the different texture classes
and how to do it, I want to tell you
how each particle size will feel.
So you can kind of have
a general idea of what you're doing
before we actually texture it.
So clay is going to be real sticky.
As you get higher amounts, it's
going to feel real.
Similar to modeling clay or Plato
and if you let it dry out, it's
going to get real hard.
But the main thing to take from clay
is it's going to stick to your fingers
and it's going to feel like modeling clay
or Plato,
sand.
It's going to feel real
coarse ingredient, high amounts.
And it's if it's primarily sand,
you're going to, have a real loose
feeling soil
and it's not going to form together
as well as one with clay.
Will.
And so it's kind of hard
to describe most people,
when they're texture
and they go off of the other two and just
subtract what that would be from
100 to get your silt.
But, the way the describes
silt, it's smooth but not sticky.
And I think,
when you have a high amount of silt,
it almost kind of feels like flour
or things like that.
It's not going to stick to you,
but it's not coarse like sand is.
You can switch.
Okay.
So, here's a diagram.
I'll go more into this on the next slide.
But this is just showing you,
once you go to estimate
all three of your particle sizes,
this is telling you, what texture class
you have,
the ideal soil and, one, you want to
kind of pay attention to if you have to
order topsoil in is your loam.
And that's kind of the equal percentage
of all three.
And that's going to give you the greatest,
I guess, balance of water
holding capacity and drainage.
If you had a clay soil,
it's going to hold the water.
It's going to hold more
water than a sandy soil will, but
it's not going to drain as fast either.
And you might run into drainage issues
while sandy soil.
It's, going to drain real good,
but it won't hold it much either.
So ideally you want either alum silt long,
or maybe a sandy loam to.
And, this is just showing you
how to use the triangle.
If you're by yourself,
you can follow this link.
This is going to go to the NRCs Soil
Texture Calculator.
And at this website
you can just type in what you think each
particle size percentage is
and it'll tell you.
But, I'll show you
how to, use this triangle.
So what we'll do,
we'll start with sand percentages.
So we'll go to 40% sand and melon.
If you click these, it'll bring up, arrows
I have on the triangle.
So we'll go 40% sand and then silt
will be on the right side going down.
So 40% silt,
it'll look like that.
And then 20% clay.
Clay is going to go on the left
and just go sideways.
So you get that
and then I'll leave you with alone
and we'll go through the other two
real fast just so everybody
gets a good idea.
One with 50% sand, 10% silt,
and 5,040% clay is going to leave you
with the sandy clay.
And by the way,
that's one of the hardest textures to do.
It just feels so weird.
And, finally, one with 15% sand, 55% silt,
and 30% clay is going to leave you
with a still D clay loam.
And again, if you,
find this too confusing to read, I know
it takes some getting used to at first.
You can always just go to this website,
especially as we go to do your own later,
and you could just type
in what you think it is
and it'll automatically give you that,
particle size class for it.
So this right here.
Don't worry about this.
I just wanted to show you,
this is the flow chart.
The Natural Resource Conservation Service
has put together when determining texture.
I'll go through all this step by step.
But the only thing I think you really need
to pay attention to, and I'll.
I'll remind you, that is, there's a
in the middle,
there's, different links for the ribbon
and I'll go into that.
And that's kind of how you can
estimate your clay percentage
and go off of your texture
based from there.
But we'll get into that after this.
Okay.
So the first thing you want to do
when texturing,
you're going to want
a decent amount of soil on your hand.
I think the guidelines from
that starts about 25g.
You really just want to fill your palm up
and yours isn't going to look like this.
Here I this is soil I had that I ground up
for analysis, and it's real dry.
So that's why it
looks the way it does. But,
you just want a good amount in your hand
and, what you want to do, you want to
wet it the soil until it's moist
and you don't want it to wet
what you want?
You kind of
want it to have a shine on the surface.
If you have too much water, it's
going to cause the soil to fall apart.
And you're going to have to either
start again, read more dry soil to it to
get it to take.
But if you don't add enough water,
you won't be able to fill
adequately, feel all the different
particle sizes, and you can't
get an accurate texture by feel.
So, you kind of want it to have a shine.
Let me see if I can get it here.
I don't know if
you can see that here,
but that's about how wet you want it.
I can work it up real good.
Feel everything right now.
So what we're going to do after
we get it wet?
If I'm going to fast on any of this,
just slow me down to.
But, we're going to try to form a ball
on her hands
and, only soils
with high sand percentages.
That's the only one
will not be able to form a ball.
So automatically, if you can't form a ball
with the soil, you know, you have just
sand and, Good way to tell your pickup
on clay content early on.
It's going to feel very firm
when working the soil into a ball.
If you have high amounts of clay.
And after this, we're going
to try to form a ribbon from the ball.
And I'll go into that more later.
So this is what ideally
what your ball should look like.
Again you want a decent amount.
Notice the shine on here.
So that's kind of how wet you want it.
And I'm just trying to form the ball
in your hands again.
If you don't have a lot of sand,
it won't be able to form a ball. And.
But only the only one not able to form
a ball is straight sand.
Even on the triangle early,
there's this sandy loam category
which is close to straight sand, but it's
it should still be able to form a ball.
So I don't think anybody here
will have straight sand.
Hopefully.
And again, you're clay
soils are going to feel very firm.
So, we'll start on the ribbon
now if you want to go to the next one.
So, what we're going to do,
if you just have to work this up in a ball
again,
the trash can.
So don't get too nasty.
So I have my.
I don't know if you can see this,
but I have my ball here.
So what we're going to do is we're going
to want to try to make a ribbon with it.
So what we'll do
get it is about as round as you can.
And you want to hold your thumb on the top
and push it over your index finger.
Like this.
Did you hold your hand up a little bit
higher?
Can you see that?
Maybe down a little bit.
So yeah. There you go.
Okay. Remember.
So we're going to push it over
index finger.
And what we're trying to look for here
is how long it gets before it breaks.
And that's a good way to,
estimate your clay percentage and,
the breaks here.
If you have about a less
than one inch ribbon before it breaks,
you're going to either have a lone,
silt loam or a sandy loam.
And the way to determine from there.
First off, you go by your ribbon length
and that'll,
give you a rough estimate
of your clay percentage.
And then if it feels real gritty,
you'll probably have a sandy loam.
If it feels extra smooth,
it'll be a silt loam.
And then if it's neither,
you just go with a long
if it's about 1 to 2in before breaking,
you're either going to have a sandy clay
loam, silty clay loam or clay loam.
And again, just go off the grittiness
or smoothness to it
after you have your ribbon size.
And let me try to work it up more.
The soil I got was really dry too,
so I had to add a lot of water to it
before it start to take,
and if it gets more than 2in
or 5cm,
you're going to get into your real high
clay texture classes
and that'll either be,
sandy clay, silty clay or clay.
And once you get over about 50 to 60%
clay, that's super high.
Like a high
clay percentage is to like 30%.
But once you're over 50 or so, it's
kind of just going to be straight
clay on all of the triangle.
So, if you want to go to the next slide,
it shows kind of what it should look like
when you first work it up.
So that's how you go.
Just keep pushing it over
until you get it.
And you kind of
want it thinner than that. But
that's what it should look like
when you first start making your ribbon,
and you just kind of
want it to fall over your finger here.
And this is a good way just to get an idea
when you're first doing it.
A lot of people,
they don't for a lot of people
I know don't even use the ribbon method.
They've just done it so much,
they kind of know how it feels like. But,
the ribbon is the best way to tell for
the first time, how much clay you have.
And if you go to the next slide.
That'll show,
what the final ribbon should look like.
And that's from the same soil
I'm holding here.
It just looks different.
I probably had it
at a better consistency
when I first worked up, but,
again, your higher clay contents
are going to lead to longer ribbons.
And that ribbon. There I have it.
Here, probably right up
close to maybe two inches or so.
So I think this and it's doesn't
feel gritty at all.
It's kind of smooth.
So this is probably either
a silty clay loam or a silty clay.
Go going based off this on here get what
the soil series had it described as but
going off the ribbon.
It's going to be right
on the borderline of those two.
And you would just make your best estimate
at that point.
Getting it that close is pretty good
no matter what.
If you want to go to the next slide,
I can tell you
some other things to consider.
And if anybody needs me to go back
or show more of the ribbon, just put it
in the chat and I'll try to show it more.
But a way to help with determining
the exact sand percentage of your soil.
So what we want to do
is put a real small amount
in her hand, and by a small amount, I mean
something.
I don't know if you can see
how much I have here, but not much.
Maybe a little more than this.
But it won't take much.
And there's no sand in this either.
But just to show you
how kind of how much you want.
So you put a very small amount and you'll
leave it in the palm of your hand,
and that'll make a mess here.
But I well,
so what you'll do, you'll about flood
your hand.
Just get like, a pool of water,
and you want to have it thoroughly,
and you want to rub it in,
and you want to
get it
good and just kind of let it drain out.
And if you have sand in there,
the sand should all only sand
should be left.
All the others
should wash out with the water.
If you just kind of carefully drain it.
And what you do is you compare what's
remaining to the initial amount you had,
and that'll give you a rough, rough
estimate of your sand.
And, if you go based off of that,
you can add that to your clay percentage.
Eli, I understand when you're flooding
your hand, you cannot hold your hand
over your computer for it
to show up in the video.
Please don't do that.
Can you describe it?
You've got
you've got some soil in your hand.
You're adding water like a puddle, right?
Yeah. And your husband don't try to.
Hire here.
I'll stick your hand
further away from the camera. Yep.
Back up a little bit in this idea.
There you go. Okay, well.
All I did was get my hand real wet,
and I had, like, a pinch of soil in there,
and you just rub it in.
You just rub it in and drain it out,
and you can see the sand grains left over,
and you kind of compare
the amount they take up on your hand to
what was there before.
And that'll give you a rough estimate
of your sand percentage.
And if you add that to your clay, you can
subtract it from 100 to get your silt.
And then, add that to determine
what texture class
you have.
And then there's some other weird
ways to pick up on sand.
You can hear it.
I know it sounds weird,
but if you have a lot of sand,
you can put it up to your ear
when you're working it in the bowl,
and you'll kind of hear that gritty sound.
And, it's really
just to let you know that it's there
and you can't really determine
how much you have
at that point, but it's a good indication
that you have sand.
And, I know a lot of people
that have tasted their soil
to try to determine sand.
I wouldn't recommend doing this.
That those sand grains
are going to stay in your mouth
a lot longer than you think they would,
and it it's not a fun time.
Also, no telling what's
in your soil sample that you have,
so you probably don't
want to go around eating it anyway.
But some of the people I did some judging
with didn't really care, and they eat
it all the time.
Again with soil.
If you have high clay contents, it's
going to leave a fingerprint behind too.
And what I mean by
that is if you take your ball
and just push it in, you can see, you
probably can't see too good there,
but it'll leave behind the fingerprint
on the ball that you can see.
If it's mainly silt or sand,
it won't do that.
And, if you have high clay soils,
something we would do for fun.
We'd let them dry out and throw each other
throughout each other,
and they'd stay together as a ball.
If there's anything else
I need to go over re texture,
anything, just let me know.